I dug into nine 24 inch snow blower options worth knowing about this season, from full machines down to the little replacement parts that keep them running. Anyone dealing with a moderate driveway, a short stretch of sidewalk, or just wanting to maintain an existing snow blower will find something useful here. The list mixes gas and cordless units with covers, shave plates, carburetors, and shear pin kits.
A Closer Look At The Lineup
EGO Power+ ASP2400D 2-Stage Snow Blower Shear Pin Set (2-Pack)
TTAJJUNK 600D Snowblower Cover Waterproof Heavy Duty
BiLLNE 790-00120-0637 24″ Shave Plate Replacement for M-TD
LIZAPUS Carburetor for Troy Bilt Storm 5524 24″ CS
Wild Badger Power 40V 20-Inch Brushless Cordless Snow Blower
Wild Badger Power 40V ProLine 20″ Cordless Snow Blower
PowerSmart 24-Inch Gas Snow Blower 212cc Two-Stage
Potiarey Shear and Cotter Pin Kit for MTD Snowblowers
licvqel 20 Sets Shear and Cotter Pins for MTD Snowblower
Inside Each Recommended Option
If a homeowner already owns an EGO Power+ 24 inch or 28 inch two-stage snow blower, this little two-pack is the kind of part that quietly saves a season. Shear pins are the small fasteners designed to break on impact when the auger hits a rock or chunk of ice, protecting the gearbox from real damage. Keeping a spare set in the garage means a stalled machine gets back to work in minutes instead of waiting for a service appointment.
The pins are specifically matched to EGO two-stage units, so the fit is predictable rather than approximate. Compared with the generic shear pin kits further down the list, these are the safer pick when brand-matched gear matters.
Useful Highlights
- Genuine EGO replacement, so dimensions and tolerances line up with the machine.
- Two pins plus lock nuts in one pack, enough for one repair with a leftover.
- Cuts downtime after an auger jam back to a few minutes of work.
- Works with both the 24 inch and 28 inch EGO two-stage models.
Worth Noting
- Brand-specific, so it does not help anyone running a Cub Cadet or Troy-Bilt unit.
- Only two pins per pack; heavy winter users may want to stash more.
Whose Garage It Belongs In
EGO Power+ 24 inch two-stage snow blower owners who want a brand-matched spare on hand.
Where Another Pick Suits Better
Cub Cadet or Troy-Bilt owners should grab the Potiarey shear pin kit further down, which spans the MTD family.
A snow blower often sits outside between storms, and a good cover is the difference between a clean pull-start in December and a frozen, rusty mess. This TTAJJUNK cover is sized at 60 by 33 by 47 inches, which fits most two-stage units, though measuring the machine first is wise. The 600D Oxford fabric is a noticeably heavier weave than the cheap non-woven covers, with PU and UV coatings to shed water and sun.
It uses buckle straps and an adjustable drawstring around the base, so gusty days are less likely to send it sailing across the yard. Orange reflective webbing on the handles helps locate it in a dark garage or after a long storm.
Useful Strengths
- 600D Oxford shell with PU coating resists rain and snow seepage.
- Seam tape helps block water from stitching gaps.
- Air vents reduce trapped moisture under the cover.
- Buckle straps and drawstring hold it through wind gusts.
Some Limits To Know
- 60 by 33 by 47 inches will not fit unusually large three-stage machines.
- Storage bag is not included, so it folds loosely when off the machine.
Feature Snapshot
Made For
Anyone storing a two-stage snow blower outdoors between storms who wants real weather protection rather than a thin dust sheet.
Swap It Out When
Compact single-stage owners with a smaller footprint may find the TTAJJUNK cover loose, in which case a tighter 24 inch sleeve is the better match.
The shave plate is the metal bar sitting under the auger housing, and it wears down faster than almost any other part because it scrapes against pavement. Once it gets thin, the auger stops grabbing snow cleanly and the machine just pushes white powder around. This BiLLNE plate is a 24 inch, 1/8 inch thick steel replacement built for MTD two-stage snow throwers, matching the OEM part numbers 753-0625, 784-5581, 790-00120, and a few related references.
Four mounting holes and a 2 1/4 inch width keep the geometry predictable for someone doing a Saturday morning swap. For MTD-family owners, this is the straightforward way to restore a clean cutting edge.
Useful Touches
- 24 inch length matches the original MTD cutting width.
- 1/8 inch steel resists wear through multiple seasons.
- Cross-references several MTD part numbers for easy fit check.
- Four-hole pattern keeps installation close to OEM geometry.
Trade Offs
- MTD-only fit, so it will not help a Toro or Honda owner.
- Bolts are not always included, so it is worth checking the package before starting.
Best Suited To
MTD two-stage snow blower owners with a worn shave plate who want a direct spec-matched replacement.
Not Your Match When
EGO or Ariens owners should instead look at the brand-specific shear pins earlier in this list, since the shave plate geometry is unique to MTD.
Gas snow blowers with rough idle, stalling, or no-start symptoms often trace back to a gummed-up carburetor, especially after sitting through a summer with old fuel. This LIZAPUS carburetor is matched to the Troy-Bilt Storm 5524 with the 5.5 horsepower 24 inch CS configuration, which makes it a focused part rather than a universal guess. Swapping in a fresh carb is often cheaper than a dealer rebuild and gets an old machine back into service.
The kit includes the carburetor body and the typical gasket hardware, and it arrives ready to install with standard small-engine tools. Compared with the shave plate earlier in the list, this part targets fuel delivery instead of the cutting edge.
A Favorable Mix
- Direct fit for the Storm 5524 24 inch CS engine.
- Restores throttle response on machines that sat with old fuel.
- Often cheaper than a full dealer carb rebuild.
- Standard small-engine installation with basic hand tools.
Where It Is Less Suited
- Specific to the Storm 5524 CS model, not a universal Troy-Bilt fit.
- Pre-existing fuel line or tank contamination should be cleaned before install, otherwise the new carb can foul quickly.
Quick Facts
Right Fit For
Troy-Bilt Storm 5524 owners chasing a no-start or rough-running issue and looking for a non-dealer repair option.
Look Elsewhere When
Owners of different Troy-Bilt models or other brands should reach for the licvqel shear pin kit, which spans more platforms.
For someone who has had enough of gas, oil, and pull cords, this Wild Badger Power cordless unit strips winter cleanup back to the basics. It runs on a 40V brushless platform with two 4.0Ah batteries and a fast charger in the box, so there is no separate battery purchase to plan around. The 20 inch clearing width and 10 inch intake depth handle typical overnight snowfalls without the bulk of a two-stage machine.
The brushless motor, a motor that uses electronic commutation rather than brushes for longer life and better efficiency, keeps the unit lighter and quieter than a gas equivalent. Compared with the ProLine version ahead, this model is the simpler entry point for small driveways and sidewalks.
Where It Delivers
- Two 4.0Ah batteries included, so runtime is not a guessing game.
- Brushless motor for quieter operation and longer motor life.
- No gas, no oil, no pull cord to wrestle on cold mornings.
- 20 inch path suits short to mid-length driveways.
Points To Note
- 20 inch width, not 24, so it is lighter-duty than the headline size.
- Battery runtime drops in wet, heavy snow, which is common for any cordless unit.
Feature Snapshot
Who Should Grab It
First-time snow blower owners with short paved driveways who want cordless simplicity over gas muscle.
A Better Fit Elsewhere
Homeowners with a longer driveway or heavier lake-effect snow will get more done with the PowerSmart 24 inch gas unit later in the lineup.
The ProLine takes the Wild Badger cordless platform and pushes the throwing distance further, which is the real headache-saver in deep snow. Snow gets ejected up to 26 feet, well past the cleared path, which means less time wrestling with clogs at the chute. The 20 inch clearing width is paired with a 10 inch intake depth, the same footprint as the standard Wild Badger, but built around a higher-output brushless motor.
The 4.0Ah battery and fast charger come in the box, so there is no extra accessory shopping. LED headlights and a single-stage design with a lighter overall build target multi-driveway homes in Midwest and Northeast climates.
Noteworthy Benefits
- 26 ft throw keeps the cleared lane clear instead of piling snow beside it.
- Single-stage build stays light enough to push without strain.
- LED headlights help finish a long driveway after sunset.
- Brushless motor pairs with a 4.0Ah battery for steady power.
Practical Considerations
- Single-stage, so it handles fresh snow better than packed or icy drifts.
- Cordless means runtime is the limiting factor for very long driveways.
Built With In Mind
Homeowners with two to three car driveways in regions with regular but moderate snowfall who want cordless convenience with extra throw distance.
Reach For A Different Pick When
Anyone facing deep, wet, or icy accumulations should look at the PowerSmart 24 inch gas two-stage unit, which handles rougher conditions.
This is the headline machine on the list, a proper 24 inch two-stage gas snow blower aimed at the kind of snowfall that buries a standard cordless unit. The 212cc engine drives a steel auger that chews through 21 inch deep snow and throws it up to 50 feet, which is meaningful on a long lane where you want the pile far away. Electric start is the kind of feature that pays for itself the first zero-degree morning.
Six forward and two reverse speeds let the user match pace to snow type, and the self-propelled drive reduces the effort needed on sloped or gravel-edged driveways. Compared with the cordless Wild Badger models, this is a different class of tool, more snow blower and less winter convenience gadget.
Good Reasons To Consider
- 212cc gas engine handles deep, heavy, and wet snow.
- Electric start removes the cold-morning pull-cord battle.
- Up to 50 ft throw distance for long driveways.
- 24 inch clearing width matches the headline category size.
Where It May Fall Short
- Heavier and louder than any cordless option, so storage and noise matter.
- Requires fuel, oil checks, and winter fuel stabilizer for off-season storage.
Feature Rundown
Perfect Match For
Homeowners with longer paved driveways in regions with regular deep snowfall who want gas-level clearing power with electric start convenience.
Where Another Pick Suits Better
Apartment dwellers or anyone with a short paved walkway should consider the Wild Badger Power 40V cordless unit, which is far easier to store.
Shear pins are the small, sacrificial fasteners that protect the auger gearbox when the blower hits something solid. They are supposed to break, and having spares on hand keeps a snowy Saturday from turning into a hardware-store run. This Potiarey kit packs 30 shear pins and 30 cotter pins, which is more than most households will burn through in a single winter.
The kit fits the MTD family of two-stage snow throwers, including Cub Cadet, Troy-Bilt, Craftsman, Yard Man, Yard Machines, Huskee, and Bolens models from 2005 onward. Compared with the EGO-specific pack earlier, this one trades brand focus for cross-platform coverage.
The Helpful Details
- 30 shear pins and 30 cotter pins, enough for multiple winters.
- Replaces 738-04124A and 714-04040 references across MTD-family brands.
- Steel construction resists rust during off-season garage storage.
- Covers 24 inch and 26 inch two-stage models in the line.
Things To Consider
- Not a fit for EGO, Ariens, or Honda machines, so brand verification matters.
- Larger pack size may be more than occasional users need.
Who It Suits Best
Multi-brand households or anyone running an MTD-family two-stage snowblower who wants a long-term spare pin supply.
Consider Something Else When
EGO owners should pair their machine with the EGO Power+ ASP2400D pin set reviewed first, which is brand-matched.
This licvqel kit is the right size for homeowners who want backup pins without committing to a giant pack. Twenty pre-paired sets of shear pins and cotter pins cover a couple of winters for most users, and the compact format is easier to toss into a small garage shelf than bulkier supplies. The fit list covers MTD, Cub Cadet, Troy-Bilt, Craftsman, Yard Man, Yard Machines, Huskee, and Bolens models.
It is the lighter sibling to the Potiarey kit above, aimed at people who break a pin once a season rather than every storm. For owners of Troy-Bilt Storm 2410, 2620, 2660, or 5524, this is a clean fit.
Where It Helps
- 20 sets is a reasonable mid-size stash for occasional users.
- Covers a wide MTD-family range including popular Troy-Bilt Storm models.
- Compact packaging fits smaller storage shelves.
Smaller Limitations
- Not a fit for EGO, Ariens, or Honda two-stage snow blowers.
- Heavy users may burn through 20 sets faster than expected across multiple storms.
Quick Technical Notes
The Right Fit
MTD-family two-stage snowblower owners who want a smaller backup kit instead of a bulk supply.
Not Your Match When
EGO Power+ owners should grab the brand-matched EGO Power+ ASP2400D set instead, since generic kits are not cross-compatible.
What Matters Most Before Choosing 24 Inch Snow Blowers
Clearing Width And Intake Depth
The 24 inch figure refers to the width of the snow path cleared in a single pass, while intake depth is how tall a bank the auger can bite through. A 24 inch width suits most two-car driveways, but paired intake depth separates a real winter tool from a light dusting helper. PowerSmart’s 21 inch intake handles overnight lake-effect snow that a 10 inch cordless intake simply cannot.
Power Source: Gas Versus Cordless
Gas models like the PowerSmart 24 inch deliver longer runtime and deeper clearing at the cost of fuel, oil, and pull cords. Cordless units like the Wild Badger Power 40V trade some muscle for quieter operation and push-button starts. For short paved walks and short driveways, cordless is usually enough. For deep snow and longer lanes, gas still leads.
Two-Stage Versus Single-Stage
A two-stage snow blower uses an auger to break up snow and then a separate impeller to throw it, which handles wet, heavy, and icy conditions better. Single-stage designs are lighter and simpler but clog more often in heavy snow. The PowerSmart 24 inch is two-stage, while the Wild Badger Power 40V ProLine is single-stage.
Replacement Parts And Long-Term Ownership
Shear pins, shave plates, carburetors, and covers all extend the useful life of any snow blower. EGO owners want brand-matched shear pins, while MTD-family owners have a wider aftermarket of pin kits and shave plates. A good cover and a stash of spare pins turn a snow blower from a single-season tool into a decade-long helper.
Key Considerations Across These Picks
Where Shoppers Go Wrong
A common mistake is buying a 20 inch cordless unit for a 200 foot driveway with lake-effect snowfall, then expecting it to keep up. The opposite mistake is buying a heavy two-stage gas unit for a 30 foot walkway, where storage and noise become a real burden. Match the machine to the driveway, not to the brand or the headline width.
Where The Extra Money Goes
Higher-tier gas snow blowers pay for steel augers instead of plastic, larger engines for wet snow, electric start instead of pull-cord, and self-propelled drive systems that reduce fatigue. Cordless ProLine models spend the premium on longer throw distance, better motors, and dual battery setups. For deep snow and long driveways, that upgrade is meaningful. For light, occasional use, a simpler pick is plenty.
Frequently Asked Questions
What Is The Difference Between Single-Stage And Two-Stage Snow Blowers?
A single-stage snow blower uses one auger to both gather and throw snow, while a two-stage adds a separate impeller for stronger throwing. Two-stage handles wet and deep snow better, while single-stage stays lighter and simpler.
Are Cordless Snow Blowers Powerful Enough For Regular Winter Use?
For fresh snow up to about 10 inches deep on short to mid driveways, a 40V brushless cordless unit like the Wild Badger Power models is genuinely capable. For deeper or wetter snow, gas two-stage remains the stronger choice.
How Often Should Snow Blower Shear Pins Be Replaced?
Shear pins are designed to break under impact, so they are replaced only when the auger jams on a rock or chunk of ice. Keeping a spare kit on hand is the practical move, especially with MTD-family machines.
Do Snow Blower Covers Really Matter?
A 600D waterproof cover keeps rain, snow, and sun off the machine between storms, which reduces rust and starter problems. For outdoor storage, a cover is one of the cheapest ways to extend working life.
Can A 24 Inch Snow Blower Handle A Two-Car Driveway?
A 24 inch clearing width matches a typical two-car driveway pass in most cases, especially with a self-propelled gas unit. Longer or curved driveways benefit from the deeper intake and longer throw of a two-stage machine.
Wrap Up
The right 24 inch snow blower comes down to driveway length, snow depth, and storage space. Gas two-stage machines like the PowerSmart 24 inch lead for deep snow and longer lanes, while cordless options like the Wild Badger Power 40V ProLine make sense for shorter paved areas and quick storm response. The replacement parts in the lineup keep any of these machines running through a long winter. Pick the tool that fits the snowfall, not the catalog hype, and the season gets a lot easier.